XtremeAV-HD2+

£1,780.00

Two Channel Video Capture Card

  • Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
  • Triple channel PCI Express capture card
  • Direct DMA to graphics memory of third party graphics cards
  • All standard features of the Xtreme range of capture cards
  • Driver support included within the EMS unified Windows driver

XtremeAV-HD2+ A capture card with two channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analogue and digital audio support

Description

Two Channel Video Capture Card

A capture card with two channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analogue and digital audio support.

The XtremeAV-HD2+ has three independent video capture inputs – two supporting High Definition capture and a third supporting Standard Definition composite video. This capture card also adds multiple channels of audio capture, which can be synchronised in software using timestamping with all video capture channels.

Both DVI High Definition inputs support HDMI, DVI, RGB and analogue Component (YPbPr) input via a DVI-I connector, at resolutions up to 4096Ɨ4096 pixels and supports 1080p (1920Ɨ1080) at 60 frames per second.

The XtremeAV-HD2+ captures all three video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside an audio stream that can be selected from one of the HDMI or one of the analogue audio ports. This data can then be processed and copied using DMA transfers to the host system for display, storage or streaming.

Video Streaming Support

Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:

  • Dataton WatchOut
  • Microsoft Expression Encoder
  • Microsoft Windows® Media Encoder
  • VideoLAN VLC
  • NorPix StreamPix
  • VitualDub
  • Adobe Flash Encoder
  • VidBlaster
  • AMCap and other DirectShow compatible software

For further details see the EMS DirectShow SDK documentation supplied as part of a typical installation.

Software

A single XtremeAV device supports up to 16 independent scale factors, colour spaces and frame rate clients, which enables multiple streams to be sent to and from the card at the same time in different formats.

Supports timestamp for capture synchronisation across inputs, cards and systems.
For the use with edge blending, frame stitching, stereoscopic and many more applications using gen-locked sources.

Flexible and configurable preferred mode EDID Management
Allows programming of custom EDID parameters including ā€˜Preferred Mode’

Low input to output capture latency
DMA to third party graphics vendors back and front buffers via Direct3D
Compatibility with AMD DirectGMA
Compatibility with Nvidia GPUDirect

Software Interfaces

XtremeAV driver & command line interface
Supplied with a standard application for full control of any Vision capture card, this includes GUI’s for window properties, input settings, on screen display and EDID configuration.
The XtremeAV application also includes a comprehensive command line interface for all GUI controls.

RGBEasy*
SDK for advanced audio and video control
Sample applications including low latency DirectX rendering

DirectShow
DirectShow SDK
Sample applications including AV encoding
SDK diagnostic transform filters
Kernel Mode – WDM video capture filters (crossbar required)
User Mode – Additional support for PiP, IAMStream control and cropping

Specifications

Specifications:

VIDEO INPUT

  • HDMI
    • Port: 2x HDMI 1.4 Type-A port
    • Typical resolution/frame rate:
      • 4096x2160p/3840x2160p 23.98/24/25/29.97/30/59.94/60
      • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1920x1080i 25/29.97/30
      • 1280x720p 23.98/24/25/29.97/30/50/59.94/60
      • 720x576p 50/100
      • 720x576i 25/50
      • 720x480p 59.94/60
      • 720x480i 29.97/30
    • Color depth: 8/10/12-bit
    • Color sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
  • USB
    • Port: 2x USB 3.0 Type-A port
    • Resolution/frame rate: Up to 1920x1080p, 60fps
    • Codec: YUYV, MJPG, NV12
  • Phone Camera
    • Connection mode: LAN
    • Resolution/frame rate: Up to 1080p, 60fps
  • SRT stream
    • Resolution/frame rate: Up to 1080p, 60fps
  • RTMP stream
    • Resolution/frame rate: Up to 1080p, 60fps
  • NDI stream
    • NDI® HX2 or NDI® HX3
    • Resolution/frame rate: Up to 1080p, 60fps
  • Video
    • Resolution: Up to 4K
    • Codec: H.264
    • Format: MOV/MP4
  • Picture
    • Format: JPEG/PNG/BMP

AUDIO INPUT

  • Mic/line in: 1x 3.5mm jack, 2-channel, 48 KHz, 16-bit
  • Audio input from HDMI port: 2-channel, 48 KHz, 16-bit
  • Audio input from USB port: 2-channel (only microphone supported)
  • Audio input from phone microphone
  • Audio from SRT stream
  • Audio from RTMP stream
  • Audio from NDI stream
  • Audio embedded in video files
  • Background music (BGM): MP3, M4A, WAV files

VIDEO OUTPUT

  • Streaming and recording
    • Resolution: 1080p, 720p, 540p, 360p (only for NDI)
    • Frame rate: 60fps, 30fps, 15fps
    • Bitrate:
      • NDI® HX3: up to 62.0Mbps, down to 1.5Mbps
      • Others: up to 30.0Mbps, down to 256kpbs
    • Key frame interval: customizable
    • Profile: High profile, Main profile, Baseline profile
    • Bitrate mode: VBR, CBR
  • USB-C DP-OUT
    • Port: 1* USBĀ 3.0Ā Type-CĀ port
    • Display: 1920x1080
    • Frame rate: 60fps
    • Sampling format: RGB 4:4:4Ā 

AUDIO OUTPUT

  • Streaming and recording: 2-channel, 16-bit, 48Ā KHz, aac, 64kbps/96kbps/128kbps
  • Headphone output: 1xĀ 3.5mm jack, 2-channel, 48Ā KHz, 16-bit
  • Audio output via Bluetooth device: 2-channel, 48Ā KHz, 16-bit
  • Audio output via USB-CĀ OUT port: 2-channel, 48Ā KHz, 16-bit
  • Audio output via USB-A port: 2-channel, 48Ā KHz, 16-bit

FEATURES OF USB-A PORT

  • Connect to a USB A/V device, such as webcam, USB microphone, USB speaker, etc.
  • Connect to a USB flash drive
    • To transfer video, picture, audio and other media files, firmware update files, log files, etc.
    • Supported system format: FAT32, exFAT and NTFS

FEATURES OF USB-C OUT PORT

  • Connect to an external screen
    • Connection mode: Connect the device to a monitor with a USB-C to HDMI/VGA/DP adapter
    • A/V display mode options: Clean Program, Duplicate Screen, Loop HDMI 1, Loop HDMI 2
    • Image rotation: Rotate 90° to left, or rotate 90° to right
  • Connect to a computer
    • Transfer video, picture, audio and other media files, firmware update files, log files, etc.

NETWORK

  • Supports Ethernet and WiFi
    • Ethernet: 1x RJ45 port, 10/100/1000 Mbps Base-T
    • WiFi: 2.4G/5G, Station and AP modes supported
  • Supports Bluetooth for audio monitoring with Bluetooth devices
    • Bluetooth: BT 5.0

DIRECTOR UTILITY APP

  • OS version: iOS 11 and later, Android 7.0 and later
  • Phone Camera: Use a phone as a camera
    • Stream images taken by the phone to Director device
    • Stream images taken by the phone to a destination via SRT
  • Remote Assistant: Control Director device remotely
    • Switch and manage scenes, set switch mode and effect, implement FTB, free scene, and control PTZ camera
    • Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
    • Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
    • Start/stop recording, take screenshots, and manage album files
    • Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
    • Control and manage BGM
    • View real-time device status
    • Power off the device remotely

WEB UI

  • Set and manage device
  • Switch and manage scenes, set switch mode and effect, implement FTB, freeze scene, and control PTZ camera
  • Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
  • Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
  • Start/stop recording, take screenshots and manage album files
  • Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
  • Control and manage BGM
  • Control media files
  • View real-time device status
  • Supports registering Magewell Control Hub (V2.1.20 and later) for centralized management

SCREEN

  • Size: 5.44"
  • Type: AMOLED
  • Aspect ratio: 16:9Ā 
  • Resolution: 1920x1080
  • Brightness: 350 nits
  • Color depth: 8-bit
  • Contrast ratio: 6000:1
  • Color gamut: 105% NTSC
  • Refresh rate: 60Hz
  • Viewing direction: All
  • PPI: 405
  • Touchscreen: Capacitive
  • Screen coating: Anti-fingerprint coating

STORAGE

  • Local storage: 64 GB
  • SD card (not supplied): FAT32 (Under 128G), NTFS, exFAT

DIMENSIONS

  • 147.2 mm x 90 mm x 28.5 mm

POWER

  • AC power
    • Power input: 12V/1.5A
    • Maximum power consumption: 15W
  • Battery pack
    • 2x DC 7.4V (NP-F battery packs, not supplied)
    • Hot swappable

BATTERY INDICATORS

  • QTY: 2
  • Green: 50% - 100%
  • Orange: 25% - 50%
  • Red: <25%
  • Off: depleted

WORKING ENVIRONMENT

  • Operating temperature: –10 to 50 deg C (AC power)
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing
Accessories

You May Also Like...