XtremeRGB-Ex8

£1,425.00

Eight channel SD capture card

  • High performance DMA to system memory or direct graphics memory with scatter gather
  • On board processor for real time mode and sync detection
  • Support for all PAL, NTSC, SECAM or S-Video video modes
  • Dynamic input source selection

The XtremeRGB-Ex8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats

Description

Eight channel SD capture card

The XtremeRGB-Ex8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats. XtremeRGB-Ex8 video capture card supports de-interlaced video capture and display at 25 / 30Ā fps for real time video overlays.

The XtremeRGB-Ex8, a stand alone PCI Express four laneĀ plug in capture card, delivers extreme performance with 480 MB/s transfer bus bandwidth. This industry beating performance makes the XtremeRGB-Ex8 ideal for a wide range of applications including:

  • Multi-display presentation software: recommended by industry leaders Dataton WATCHOUTā„¢
  • Digital signage
  • Machine vision: acquires high resolution camera outputs
  • Voyage data recorders: capture radar images
  • Simulation/ Military: acquire high resolution video and simulation for comment and control

Video Streaming Support

DirectShow drivers for WDM streaming driver supports the following applications to encode, record and stream video over networks or the Internet:

  • Dataton WatchOut
  • Microsoft Expression Encoder
  • Microsoft WindowsĀ® Media Encoder
  • VideoLAN VLC
  • NorPix StreamPix
  • VirtualDub
  • Adobe Flash Encoder
  • VidBlaster
  • AMCap and other DirectShow compatible software

For further details see the EMS DirectShow SDK documentation supplied as part of a typical installation.

Software

The XtremeRGB-Ex8 video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the XtremeRGB-Ex8 application to automatically detect the video source format and display the captured video in a window on your desktop.

Video Walls

The Xtreme range of video capture cards are fully integrated with the EMS family of video wall multi-display products. The XtremeRGB-Ex8 captures a composite or S-video output from one source and then displays it as an independent application on your video wall, this is done in real time.

The XtremeRGB-Ex8 has a powerful software application to automatically configure the timing and the format of the input source and display the captured data.

Specifications

Specifications:

VIDEO INPUT

  • HDMI
    • Port: 2x HDMI 1.4 Type-A port
    • Typical resolution/frame rate:
      • 4096x2160p/3840x2160p 23.98/24/25/29.97/30/59.94/60
      • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
      • 1920x1080i 25/29.97/30
      • 1280x720p 23.98/24/25/29.97/30/50/59.94/60
      • 720x576p 50/100
      • 720x576i 25/50
      • 720x480p 59.94/60
      • 720x480i 29.97/30
    • Color depth: 8/10/12-bit
    • Color sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
  • USB
    • Port: 2x USB 3.0 Type-A port
    • Resolution/frame rate: Up to 1920x1080p, 60fps
    • Codec: YUYV, MJPG, NV12
  • Phone Camera
    • Connection mode: LAN
    • Resolution/frame rate: Up to 1080p, 60fps
  • SRT stream
    • Resolution/frame rate: Up to 1080p, 60fps
  • RTMP stream
    • Resolution/frame rate: Up to 1080p, 60fps
  • NDI stream
    • NDI® HX2 or NDI® HX3
    • Resolution/frame rate: Up to 1080p, 60fps
  • Video
    • Resolution: Up to 4K
    • Codec: H.264
    • Format: MOV/MP4
  • Picture
    • Format: JPEG/PNG/BMP

AUDIO INPUT

  • Mic/line in: 1x 3.5mm jack, 2-channel, 48 KHz, 16-bit
  • Audio input from HDMI port: 2-channel, 48 KHz, 16-bit
  • Audio input from USB port: 2-channel (only microphone supported)
  • Audio input from phone microphone
  • Audio from SRT stream
  • Audio from RTMP stream
  • Audio from NDI stream
  • Audio embedded in video files
  • Background music (BGM): MP3, M4A, WAV files

VIDEO OUTPUT

  • Streaming and recording
    • Resolution: 1080p, 720p, 540p, 360p (only for NDI)
    • Frame rate: 60fps, 30fps, 15fps
    • Bitrate:
      • NDI® HX3: up to 62.0Mbps, down to 1.5Mbps
      • Others: up to 30.0Mbps, down to 256kpbs
    • Key frame interval: customizable
    • Profile: High profile, Main profile, Baseline profile
    • Bitrate mode: VBR, CBR
  • USB-C DP-OUT
    • Port: 1* USBĀ 3.0Ā Type-CĀ port
    • Display: 1920x1080
    • Frame rate: 60fps
    • Sampling format: RGB 4:4:4Ā 

AUDIO OUTPUT

  • Streaming and recording: 2-channel, 16-bit, 48Ā KHz, aac, 64kbps/96kbps/128kbps
  • Headphone output: 1xĀ 3.5mm jack, 2-channel, 48Ā KHz, 16-bit
  • Audio output via Bluetooth device: 2-channel, 48Ā KHz, 16-bit
  • Audio output via USB-CĀ OUT port: 2-channel, 48Ā KHz, 16-bit
  • Audio output via USB-A port: 2-channel, 48Ā KHz, 16-bit

FEATURES OF USB-A PORT

  • Connect to a USB A/V device, such as webcam, USB microphone, USB speaker, etc.
  • Connect to a USB flash drive
    • To transfer video, picture, audio and other media files, firmware update files, log files, etc.
    • Supported system format: FAT32, exFAT and NTFS

FEATURES OF USB-C OUT PORT

  • Connect to an external screen
    • Connection mode: Connect the device to a monitor with a USB-C to HDMI/VGA/DP adapter
    • A/V display mode options: Clean Program, Duplicate Screen, Loop HDMI 1, Loop HDMI 2
    • Image rotation: Rotate 90° to left, or rotate 90° to right
  • Connect to a computer
    • Transfer video, picture, audio and other media files, firmware update files, log files, etc.

NETWORK

  • Supports Ethernet and WiFi
    • Ethernet: 1x RJ45 port, 10/100/1000 Mbps Base-T
    • WiFi: 2.4G/5G, Station and AP modes supported
  • Supports Bluetooth for audio monitoring with Bluetooth devices
    • Bluetooth: BT 5.0

DIRECTOR UTILITY APP

  • OS version: iOS 11 and later, Android 7.0 and later
  • Phone Camera: Use a phone as a camera
    • Stream images taken by the phone to Director device
    • Stream images taken by the phone to a destination via SRT
  • Remote Assistant: Control Director device remotely
    • Switch and manage scenes, set switch mode and effect, implement FTB, free scene, and control PTZ camera
    • Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
    • Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
    • Start/stop recording, take screenshots, and manage album files
    • Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
    • Control and manage BGM
    • View real-time device status
    • Power off the device remotely

WEB UI

  • Set and manage device
  • Switch and manage scenes, set switch mode and effect, implement FTB, freeze scene, and control PTZ camera
  • Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
  • Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
  • Start/stop recording, take screenshots and manage album files
  • Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
  • Control and manage BGM
  • Control media files
  • View real-time device status
  • Supports registering Magewell Control Hub (V2.1.20 and later) for centralized management

SCREEN

  • Size: 5.44"
  • Type: AMOLED
  • Aspect ratio: 16:9Ā 
  • Resolution: 1920x1080
  • Brightness: 350 nits
  • Color depth: 8-bit
  • Contrast ratio: 6000:1
  • Color gamut: 105% NTSC
  • Refresh rate: 60Hz
  • Viewing direction: All
  • PPI: 405
  • Touchscreen: Capacitive
  • Screen coating: Anti-fingerprint coating

STORAGE

  • Local storage: 64 GB
  • SD card (not supplied): FAT32 (Under 128G), NTFS, exFAT

DIMENSIONS

  • 147.2 mm x 90 mm x 28.5 mm

POWER

  • AC power
    • Power input: 12V/1.5A
    • Maximum power consumption: 15W
  • Battery pack
    • 2x DC 7.4V (NP-F battery packs, not supplied)
    • Hot swappable

BATTERY INDICATORS

  • QTY: 2
  • Green: 50% - 100%
  • Orange: 25% - 50%
  • Red: <25%
  • Off: depleted

WORKING ENVIRONMENT

  • Operating temperature: –10 to 50 deg C (AC power)
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing
Accessories

You May Also Like...