- XTREME VIDEO CAPTURE CARDS
XtremeDV-SDI4
Ideal for use in broadcast markets or with any SDI capable applications the XtremeDVI-SDI4 provides four 3G-SDI inputs each capable of capturing 1920x1080p at 60 frames per second.
- GRAPHICS CONTROLLER (MULTISCREEN)
XtremeImage-4K
4 channel DisplayPort 4K Graphics Card
- Four 4K60 4:4:4 HDMI 2.0 outputs
- Enables full 4K60 capture and display in EMS VSN controllers
- VIDEO WALL CONTROLLER SYSTEM
XtremeIPC-VSN-Expansion System
- 9 or 11 Slot Expansion Chassis
- Express9-G3 PCIe backplane providing 1 x 8 lane slot and 8 x 4 lane slots
- SOFTWARE & UTILITY
Vigi Control - Wall Management
- Easily control output sources such as IP feeds, video captures and local applications
- Create templates and produce zones on your video wall for easy placement of content.
XtremeRGB-Ex4+
£1,497.00
Four channel SD & 1 channel DVI/HD/RGB capture card
- HD modes using the supplied DVI/ Component Adapter or DVI/HDMI Adapter (HDCP not supported)
- Four SD capture channels for PAL/NTSC, SECAM (composite or S-Video inputs)
- Four lane PCI Express interface with a maximum data rate of 650 MB/s
- Support for Windows® and Linux
XtremeRGB-Ex4+ video capture card with five complete video capture channels supporting a single channel for up to 1920×1080 DVI or 2048×1536 Analog resolution, plus four SD Analog capture channels, and provides a maximum data rate of 650 MB/s.
Category: XtremeRGB Range
Tags: capture, composite, dvi/hdmi, video, visionrgb-sd4+1, xtremergb-ex4+
Description
XtremeRGB-Ex4+- Four channel SD capture card
This video capture card has five complete video capture channels supporting a single channel for up to 1920×1080 DVI or 2048×1536 Analog resolution, plus four SD Analog capture channels.
The XtremeRGB-Ex4+ captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a EMS graphics card is used, the XtremeRGB-Ex4+ transfers the data directly to the graphics card thereby increasing performance. The XtremeRGB-Ex4+ capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non EMS graphics card, the XtremeRGB-Ex4+ sends the data to system memory or direct to the graphics card, dependent on the software used for display.
The XtremeRGB-Ex4+ is an ideal solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources. Typical applications include:
- Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment
- Streaming video applications
- Video wall controllers
RGB Streaming
For streaming applications, the XtremeRGB-Ex4+ can be used with Windows Media Encoder to compress and stream captured video. To replay the video, use Windows® Media Player. Any application compatible with Windows® DirectShow technology can use the XtremeRGB-Ex4+ due to its built-in WDM support.
Video Streaming Support
DirectX WDM streaming driver supports the following applications, to encode, record and stream video over networks or the Internet:
- Dataton WatchOut
- Microsoft Expression Encoder
- Microsoft Windows® Media Encoder
- VideoLAN VLC
- NorPix StreamPix
- VitualDub
- Adobe Flash Encoder
- VidBlaster
- AMCap and other DirectShow compatible software
For further details see the EMS DirectShow SDK documentation supplied as part of a typical installation.
Software
The XtremeRGB-Ex4+ video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the XtremeRGB-Ex4+ application to automatically detect the video source format and display the captured video in a window on your desktop.
Specifications
Specifications:
VIDEO INPUT
- HDMI
- Port: 2x HDMI 1.4 Type-A port
- Typical resolution/frame rate:
- 4096x2160p/3840x2160p 23.98/24/25/29.97/30/59.94/60
- 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
- 1920x1080i 25/29.97/30
- 1280x720p 23.98/24/25/29.97/30/50/59.94/60
- 720x576p 50/100
- 720x576i 25/50
- 720x480p 59.94/60
- 720x480i 29.97/30
- Color depth: 8/10/12-bit
- Color sampling: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2
- USB
- Port: 2x USB 3.0 Type-A port
- Resolution/frame rate: Up to 1920x1080p, 60fps
- Codec: YUYV, MJPG, NV12
- Phone Camera
- Connection mode: LAN
- Resolution/frame rate: Up to 1080p, 60fps
- SRT stream
- Resolution/frame rate: Up to 1080p, 60fps
- RTMP stream
- Resolution/frame rate: Up to 1080p, 60fps
- NDI stream
- NDI® HX2 or NDI® HX3
- Resolution/frame rate: Up to 1080p, 60fps
- Video
- Resolution: Up to 4K
- Codec: H.264
- Format: MOV/MP4
- Picture
- Format: JPEG/PNG/BMP
AUDIO INPUT
- Mic/line in: 1x 3.5mm jack, 2-channel, 48 KHz, 16-bit
- Audio input from HDMI port: 2-channel, 48 KHz, 16-bit
- Audio input from USB port: 2-channel (only microphone supported)
- Audio input from phone microphone
- Audio from SRT stream
- Audio from RTMP stream
- Audio from NDI stream
- Audio embedded in video files
- Background music (BGM): MP3, M4A, WAV files
VIDEO OUTPUT
- Streaming and recording
- Resolution: 1080p, 720p, 540p, 360p (only for NDI)
- Frame rate: 60fps, 30fps, 15fps
- Bitrate:
- NDI® HX3: up to 62.0Mbps, down to 1.5Mbps
- Others: up to 30.0Mbps, down to 256kpbs
- Key frame interval: customizable
- Profile: High profile, Main profile, Baseline profile
- Bitrate mode: VBR, CBR
- USB-C DP-OUT
- Port: 1* USB 3.0 Type-C port
- Display: 1920x1080
- Frame rate: 60fps
- Sampling format: RGB 4:4:4
AUDIO OUTPUT
- Streaming and recording: 2-channel, 16-bit, 48 KHz, aac, 64kbps/96kbps/128kbps
- Headphone output: 1x 3.5mm jack, 2-channel, 48 KHz, 16-bit
- Audio output via Bluetooth device: 2-channel, 48 KHz, 16-bit
- Audio output via USB-C OUT port: 2-channel, 48 KHz, 16-bit
- Audio output via USB-A port: 2-channel, 48 KHz, 16-bit
FEATURES OF USB-A PORT
- Connect to a USB A/V device, such as webcam, USB microphone, USB speaker, etc.
- Connect to a USB flash drive
- To transfer video, picture, audio and other media files, firmware update files, log files, etc.
- Supported system format: FAT32, exFAT and NTFS
FEATURES OF USB-C OUT PORT
- Connect to an external screen
- Connection mode: Connect the device to a monitor with a USB-C to HDMI/VGA/DP adapter
- A/V display mode options: Clean Program, Duplicate Screen, Loop HDMI 1, Loop HDMI 2
- Image rotation: Rotate 90° to left, or rotate 90° to right
- Connect to a computer
- Transfer video, picture, audio and other media files, firmware update files, log files, etc.
NETWORK
- Supports Ethernet and WiFi
- Ethernet: 1x RJ45 port, 10/100/1000 Mbps Base-T
- WiFi: 2.4G/5G, Station and AP modes supported
- Supports Bluetooth for audio monitoring with Bluetooth devices
- Bluetooth: BT 5.0
DIRECTOR UTILITY APP
- OS version: iOS 11 and later, Android 7.0 and later
- Phone Camera: Use a phone as a camera
- Stream images taken by the phone to Director device
- Stream images taken by the phone to a destination via SRT
- Remote Assistant: Control Director device remotely
- Switch and manage scenes, set switch mode and effect, implement FTB, free scene, and control PTZ camera
- Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
- Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
- Start/stop recording, take screenshots, and manage album files
- Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
- Control and manage BGM
- View real-time device status
- Power off the device remotely
WEB UI
- Set and manage device
- Switch and manage scenes, set switch mode and effect, implement FTB, freeze scene, and control PTZ camera
- Switch and manage GFX, edit GFX text and picture in real time, and control scoreboard, timer and stopwatch
- Control audio, including adjusting audio level, switch microphone and monitor device, mute audio and monitor audio exclusively
- Start/stop recording, take screenshots and manage album files
- Set streaming servers, start/stop streaming, view streaming status and speed, and view live comments
- Control and manage BGM
- Control media files
- View real-time device status
- Supports registering Magewell Control Hub (V2.1.20 and later) for centralized management
SCREEN
- Size: 5.44"
- Type: AMOLED
- Aspect ratio: 16:9
- Resolution: 1920x1080
- Brightness: 350 nits
- Color depth: 8-bit
- Contrast ratio: 6000:1
- Color gamut: 105% NTSC
- Refresh rate: 60Hz
- Viewing direction: All
- PPI: 405
- Touchscreen: Capacitive
- Screen coating: Anti-fingerprint coating
STORAGE
- Local storage: 64 GB
- SD card (not supplied): FAT32 (Under 128G), NTFS, exFAT
DIMENSIONS
- 147.2 mm x 90 mm x 28.5 mm
POWER
- AC power
- Power input: 12V/1.5A
- Maximum power consumption: 15W
- Battery pack
- 2x DC 7.4V (NP-F battery packs, not supplied)
- Hot swappable
BATTERY INDICATORS
- QTY: 2
- Green: 50% - 100%
- Orange: 25% - 50%
- Red: <25%
- Off: depleted
WORKING ENVIRONMENT
- Operating temperature: –10 to 50 deg C (AC power)
- Storage temperature: –20 to 70 deg C
- Relative Humidity: 5% to 90% non-condensing
Accessories
You May Also Like...
Related products
XtremeAV-SDI
£1,914.00
Three Channel Video Capture Card
The XtremeAV-SDI HD/SD-SDI Capture Card is a four lane PCI Express capture card with three independent channels of video capture for 3G SDI, DVI and Composite video, with full analog and digital audio support. These three independent video channels can be captured simultaneously.
- Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
- Triple channel PCI Express capture card
- Direct DMA to graphics memory of third party graphics cards
- All standard features of the Xtreme range of capture cards
- Driver support included within the EMS unified Windows driver
The XtremeAV-SDI HD/SD-SDI Capture Card is a four lane PCI Express capture card with three independent channels of video capture for 3G SDI, DVI and Composite video, with full analog and digital audio support. These three independent video channels can be captured simultaneously.
XtremeRGB-Ex2+
£1,497.00
Dual channel video capture card DVI/HD/RGB
- High performance DMA to system memory or direct to graphics memory with scatter gather
- On board processor for real time mode and sink detection
- Dynamic input source selection
- Administrator mode
- HD capture for each channel up to 1080P at 60 frames per second, HDMI capture up to 1080p and DVI up to 1920x1200
XtremeRGB-Ex8
£1,425.00
Eight channel SD capture card
The XtremeRGB-Ex8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats
- High performance DMA to system memory or direct graphics memory with scatter gather
- On board processor for real time mode and sync detection
- Support for all PAL, NTSC, SECAM or S-Video video modes
- Dynamic input source selection
The XtremeRGB-Ex8 is an eight channel PCI Express video capture card. The card supports PAL, NTSC and SECAM in both composite and S-video input formats
USB Capture DVI Plus
Magewell Part Number: 32080 One channel HD Capture Device
Quote Me
- DVI + audio
- VGA + audio
- Component + audio
- HDMI + embedded audio
- Audio input via Line in
- Extract HDMI embedded audio output via Line out
Quote Me
Magewell Director Mini
£1,040.00
Magewell Part Number: 55110
- A portable device that does multi-input switching, graphics, streaming, recording and monitoring
- Supports flexible input sources ranging from AV and IP streams to media files
- Intuitive user interface and companion app for scene editing and creating shows
- Rich output possibilities including RTMP and SRT streams, NDI® HX3 and local displays (picture-in-picture or side-by-side) into a combined output
USB Capture HDMI Plus
Magewell Part Number: 32040 One channel 2K Capture Device
Quote Me
- Capture HDMI + embedded audio
- Loop-through HDMI signal
- Audio input via mic
- Extract HDMI embedded audio output via headphones
- Support 4Kp60 4:2:0 input. Capture from the newest game consoles such as PS4 Pro and XBOX One S.
Quote Me
USB Capture SDI 4K Plus
Magewell Part Number: 32100 One Channel 4K Capture Device
Quote Me
- Capture SD/HD/3G/2K/6G SDI + embedded audio
- Loop-through SD/HD/3G/2K/6G SDI
- Audio input via Line in
- Extract SDI embedded audio and output via Line out
Quote Me
